Category Archives: cell phone booster kit

140K coverage is not new, but with one cell phone amplifier IS!

Here are few outstanding features and competitive advantages of Wilson Pro 4000R Cell Phone Signal Booster 460131 (now WilsonPro 460231)

Better Control with On-Board Software: To ensure greater connectivity throughout multi-storey buildings and other large spaces indoors, each interior antenna path is automatically and independently controlled with onboard software. Each port is independently controlled and has ability to maneuver its gain level (either up or down) as determined by the signal environment’s conditions. This is done without disrupting coverage from other antennas. Wilson Pro 4000 R’s software’s thus an artificial intelligence marvel.
Overpowering Won’t Cause Shutdown: Wilson-Pro 4000-R booster won’t shut down, regardless of how strong the incoming signal may be. Due to the amazing technology of XDR, the booster will continue to work in the strongest signal environments where others would shut down to meet original FCC regulations. However, the XDR technology enables it to stay powered but reduce the gain down to zero but rise again when overpowering signals subside. This saves precious time and maintenance headaches.
Sophisticated Software: Cellular signals are continuously fluctuating. However, the booster always operates at maximum gain because the software constantly monitors signal levels and makes adjustments accordingly. This level of sophistication in cellular signal amplifier provides consistent and stable reception indoors in extremely large spaces of 100,000 square feet to 140,000 sq. ft. With its “intelligent control” feature, signal gain is automatically adjusted with WilsonPro cellular booster, ensuring the building receives even signal coverage.
Easier Access with Color LCD: Wilson 4000R has a very clear and illustrative color LCD screen. The four-way navigation button beside the colored display enables users to go through all settings in order to ensure peak performance, with ease. Unlike other boosters, this Wilson 4000-R feature provides integrators effective and easy control of the product from start to finish. Wilson4000R also assists them in maintaining the booster system to make manual adjustments to uplink and downlink gain levels for each band.
More Downlink Power: In environments where the incoming signal is weak, at least +12 dB more down link power than any of its competitors ensures a stronger cell signal. The benefit achieved is a stronger signal sent to the inside antennas, thus covering a larger area from a single booster. This is the main feature of any cellular amplifier system and this Wilson Electronics’ commercial grade booster system provides the best output making Wilson 4000 R, the flagship product of its Wilson Pro Series boosters.
Higher Uplink Power: A higher uplink power provides up to +3 dB more than any of its competitors, resulting in a stronger signal transmitted to the tower. An increased range from the cell site and greater user capacity is assured. In commercial and industrial environments, high aggregate cellular usage capacity is extremely important. It is crucial because businesses cannot afford cellular congestion resulting in less than optimal performance. This booster rises and meets the challenge by providing highest uplink power.


SureCall Force5 – A guide to Signal Boosters

The SureCall Force5 is a self-contained, five-band, Voice/3G/4G LTE cellular signal booster
The SureCall Force5 is a self-contained, five-band, Voice/3G/4G LTE cellular signal booster

The SureCall Force5 is a self-contained, five-band, Voice/3G/4G LTE cellular signal booster. It is built with high linearity to support upto 100 simultaneous callers and data users for coverage areas of 20-25,000 square feet. The Force5 combines PCS and Cellular dual-bands for all major carriers with LTE and AWS frequencies for Verizon, AT&T and T-Mobile. It is considered to be a commercial grade cellular amplification solution suitable for offices, schools, hospitals, industrial buildings, housing complexes to name a few.

The Force5 is a reasonably priced signal amplification that acts as an alternate to expensive and complex DAS integrations. It is the first 5-band cellular booster compliant with FCC certification standards and the benchmark for providing optimal signal booster coverage in all types of large building environment applications. Introduced in 2009, it has thousands of successful installations throughout the US and Canada.

Outside Antenna

The Force5 kit comes with a choice of two outside antennas:

The SC-288W Omni Outdoor Antenna has 4dB gain. Omni antennas receive and send signals in a 360º radius. They can receive signals from multiple cell towers and are best for boosting signal on many different carriers. They are excellent in most situations where the existing outside signal strength is moderate to strong.

The SC-230W-S Yagi Outdoor Antenna has up to 8dB of gain. It is a directional antenna that can reach cell towers up to 30 miles away. It needs to be set up pointing in the direction of the cell tower, and because it is directional it will only pick up signal in that direction.

Inside Antenna

The Force5 kit also has a choice of two inside antennas:

The SC-222W Omni Dome Antenna is a multi-band omni-directional plastic dome antenna with that broadcasts signals in all directions. It has 6dB gain and is designed for central locations with 360º coverage. The antenna range is dependent on three factors namely, 1) physical obstructions, 2) power generated by the booster and 3) reception from outside signal received and distributed by the outside antenna.

The SC-248W Panel Antenna is a directional antenna with up to 10dB gain. Panel antennas allow optimum reception to targeted areas. It can be mounted to either the wall or ceiling.

Number of Inside Antennas

The inside antennas can be either the 222-W Omni Dome Antenna or the 248W Panel Antenna.

The standard kit comes with one inside antenna, one 30’ coax cable, and one 75’ coax cable.

The two-antenna kit comes with two inside antennas, a 2-way splitter, one 30’ coax cable, one 75′ coax cable, and two 50’ coax cables.

The four-antenna kit comes with four inside antennas, a 4-way splitter, one 30’ coax cable, one 75′ coax cable, and four 50’ coax cables.

Sentry Remote Monitoring

Sentry is SureCall’s revolutionary advancement in remote optimization and system management. A must-have for IT & Building Managers where continuous up time is mission critical.





WeBoost Connect 4G-X Cell Phone Booster Kit

The WeBoost Connect 4G-X is a powerful amplifier that wirelessly enhances and improves cell signals for cellular devices (smartphones, tablets, Kindle, etc). With up to +70 dB (decibel) gain, it provides stronger signal, longer battery life, and clear connections to your cell phone.

With over 40 years of industry-leading telecom experience, WeBoost by Wilson Electronics has been solving frustrating cell phone reception problems with FCC-certified signal boosters for weak signal areas in the city or remote rural areas. Easy to install with a complete DIY kit.

WeBoost’s has been the most powerful 4G building booster with a professional grade. One can get better voice and data with fewer dropped calls, improved voice quality, faster uploads and downloads. Boosts cell signals up to 32x – Enhances 4G LTE and 3G signals for buildings up to 7,500 sq ft.

Signal Booster for Faster Signal Reception
Signal Booster for Faster Signal Reception

Compatible with all US networks – Works on Verizon, AT&T, Sprint, T-Mobile, US Cellular, Straight Talk and more. DIY installation. – All parts included in the kit and trained support staff on call to assist. 30-day guarantee from manufacturer and 2-year warranty.

Key Features
  • Boosts signal for all U.S. & Canadian cell carriers
  • Friendly, U.S.-based customer support
  • All components needed for installation in one package
  • FCC & Industry Canada Certified
Profitable Benefits
  • Improved indoor cellular voice and data signal
  • Reliable cell signal and more consistent data speeds
  • Faster data downloads
  • Up to 2 hours additional talk time in weak-signal areas

Kit includes

Connect 4G-X, Indoor Antenna, Outdoor Antenna, Power Supply, 75’ Cable




SureCall Force5 Signal Booster

Force5™ | 3G – 4G Five-Band Adjustable Cell Phone Booster Kits are designed primely for Large Buildings up to 25,000 sq ft.

SureCall’s Force5 is a self-contained, five-band, cellular signal booster. The Force5 is an alternative solution to a DAS system at a small fraction of the cost. Modular in design, each Force5 provides enhanced cellular and data reception for areas of 20-25,000 square feet with up to 100 users. The Force5 combines PCS and Cellular dual-bands with LTE and AWS frequencies for Verizon, AT&T and T-Mobile for a complete 2G-4G voice and data reception solution. Our three-year warranty is a testament to the quality. Following are the features that make this product stand out in the market

  • Highest 4G data rate in the industry
  • Industry’s only highly linear product line of wideband signal boosters
  • Since 2009 intro, thousands of successful installations throughout the U.S. and Canada
  • Independently reconfigurable for each band
  • Covers all U.S. Cellular and PCS bands including Verizon, AT&T and G-Block
  • Independently, digitally adjustable uplink and downlink
  • First 5-band cellular booster compliant with FCC certification standards
  • Reconfigurable in the field through software
  • Dual Embedded CPU for smarter technology
  • Eight RSSI detectors for all inputs and outputs
  • Stealth technology incorporated – uplink becomes dormant when not in use, providing green, power saving operation
  • Auto Gain Control (AGC) with AGC Pre-Warning
  • Automatic shut down
  • Lowest Out of Band Emissions (OOBEto date
  • Quality metal construction, durable and resilient
  • Offers the industry’s best three year warranty Kitting Options:
  • Force5 Omni with 1 dome antenna: SC-PolyO-72




Want to know the Topmost Cell Signal Amplifier?!!

Universal Cradle Signal Booster
Universal Cradle Signal Booster

The zBoost Mobile1 ZB245 has the topmost cell signal amplifier for a cradle device, but it doesn’t compare to the wireless cell signal boosters. It features dual-band compatibility with 3G and 2G, but on the other hand lacks 4G compatibility. People who need to boost only one phone at a time can use this as it is an outstanding cell signal booster. The zBoost Mobile1 ZB245 performs as well as other cradle signal boosters, but it doesn’t compare to the performance of wireless cell phone boosters. Except for the lower price, very little sets it apart from other cradle signal boosters.

The zBoost Mobile1 ZB245 features a universal cradle design, which means that you place your phone into a holding device that attaches to your dashboard. This design is at its best as long as you’re the only person in your car, because only one phone can benefit from the boosted signal. Generally, wireless boosters allow you to use your phone naturally but the cradle design requires you to use the speakerphone or a Bluetooth connection with your stereo.

For a cradle signal booster, the amplifier’s 40 dB gain is excellent, and the 3 dB noise figure is among the best available. This implies that you’ll receive a strong five-bar signal in areas where you would typically only get a one-bar signal. It also increases the battery life of your cell phone because it doesn’t have to search for a signal.

But one disadvantage to the Mobile1 ZB245 is the lack of 4G compatibility, which is the most recent generation of cellular technology. 4G provides better voice quality and allows you to download data at a rate of 100 Mbps in a moving vehicle. However, national 4G coverage is still inferior to 3G and 2G coverage. In rural areas, you are more likely to find only 3G or 2G signals, so the lack of 4G compatibility is only a minor drawback.

The installation being a simple process comes with a 4-inch outside antenna with a 10-foot coax cable that connects the antenna to the cradle. The antenna is attached to the roof of the car with a magnet. The cradle acts as the inside antenna, so there’s only one coax cable to install. The only other installation step is attaching the cradle to the dashboard, which uses an adhesive.



A guide to Boost Cell phone Signal on the Boats

While carriers continue to expand their coverage areas by adding more towers on land, water showcases a hassle for providing adequate coverage for the passengers on boats. To deal with this problem specifically, cell phone boosters are designed wherein they take weak signal from land based towers, amplify it and broadcast it to the passengers on the boat. For a better and faster reception while docked or out on the water, the best option for the passengers would be a marine cell phone signal booster. A marine signal booster works by using an external antenna mounted on the boat which receives a cell signal from the closest tower, that is then passed to an amplifier, and then broadcast the boosted signal to the cabin via an inside antenna. The system also works in reverse when a call is being placed from a phone on the boat.


The three major prominent marine signal booster kits being the SureCall Flex2Go Marine Kit, that boosts 2G and 3G for most major carriers, the Wilson Mobile 4G Marine Kit, which boosts 2G, 3G and 4G LTE for most major carriers, and the Cradle booster, which is meant for only one phone at a time.



The Wilson Mobile 4G Marine Kit  boosts voice calls, 3G data and the new 4G LTE networks for the major carriers in North America to the inside cabin of the boat or marine vehicle. It has the strongest mobile amplifier allowed by the FCC, but if there is a very weak outside signal, the coverage area may extend only a few feet from the inside antenna.


The Sleek 4G cradle booster will boost the 2G, 3G and 4G LTE signals of all major carriers for one individual device at a time. The device should generally sit in the cradle at all times to receive boosted signal, hence requiring speakerphone or a Bluetooth headset for voice calls.


The SureCall Flex2Go Marine Kit normally boosts voice calls and 3G data to the inside cabin of the boat or marine vehicle. It is believed to have the strongest mobile amplifier allowed by the FCC. The coverage area extends only a few feet from the inside antenna if there is a weak external signal.



Important point to be noted is that a marine signal is solely meant for its use within the boat living area and not the deck. If a booster is being used on the deck, then the signal from the internal antenna can be transmitted back to the external antenna, causing oscillation or feedback, which will immediately shut down the system. A marine signal booster provides greater convenience for voice calls and data usage, as well as peace of mind in case of emergency situations.




SureCall Fusion-5 Five-Band 65db Amplifier by Cellphone-Mate (CM-Fusion-5)

The SureCall Fusion-5 (CM-Fusion-5) is the first five-band signal booster that was designed as a cost-effective all-in-one cellular solution for mid-sized to small businesses. It combines PCS and Cellular dual-bands with LTE and AWS frequencies for Verizon, AT&T and T-Mobile as a total cellular amplification solution.

For maximum flexibility, this full-featured signal booster/amplifier includes adjustable gain control and automatic shutdown. Extremely competitively priced, it requires 1/5th the space requirements of its competitors and is a fraction of the cost compared to similar amplifiers with its capabilities. This device is ideal for locations with a low cellular data and voice signal. It covers upto 10,000 square feet.

Kit includes:

The Fusion-5 amplifier apart from the list mentioned below requires at least one outside antenna, one inside antenna, and cables to connect the antennas to the amplifier in order to operate.

  • Fusion-5 amplifier
  • 5dB attenuator
  • 10dB attenuator
  • AC power supply
  • User manual
  • Mounting kit

Features that hold this product unique in the market:

  • Most affordable 5-band amplifier on the market
  • Automatic Shutdown to prevent interference to cell towers
  • Supports All 2G, 3G and 4G standards except WiMax and Nextel
  • Supports up to 15 simultaneous users
  • Uplink/Downlink Oscillation detection
  • 30-Day Money Back Guarantee
  • 2 Year Manufacturer Warrantee





iBooster 805201 Cell Phone Signal Cradle Booster for iPhone


The Wilson Electronics iBooster is the first cell phone signal booster specifically designed for all generations of iPhone including iPhone 4 to increase its signal by up to 20 times in your vehicle. It significantly improves our iPhone’s voice and data performance and signal strength in weak signal areas. By using the iBooster, we will experience fewer dropped calls, faster data rates, and clearer cell phone reception. The iBooster all-in-one cradle features a signal amplifier, built-in antenna, battery charger, and is ideal for hands free operation when used with a headset or Bluetooth device.

  • Improve cell phone signal and data rates for your iPhone by up to 20 times, and also charge the phone’s battery
  • Plug & Play Kit–easy installation; everything your need is in the box
  • Portable–can be moved easily from vehicle to vehicle
  • Extends cell phone battery life

Using Wilson Electronics’ patented technology, the iBooster amplifies signals both to and from the cell tower, increasing the power to penetrate through natural or man-made obstructions, thus enabling you to communicate where you were unable to before. Providing you with a boosted signal, it improves your iPhone’s reception and allows for greater coverage, even when you’re traveling in remote areas.

The iBooster’s main unit also functions as a cradle for your iPhone. Designed to conform to the iPhone’s sleek frame, the cradle lets you dock your iPhone while driving, so you can keep both hands on the wheel. The iBooster is compatible with both 2G and 3G iPhones and features a pass-thru iPhone connector for convenient access to accessories. It also features a built-in charger, which will charge your iPhone’s battery while the car’s power is running.

The kit comes with everything you need for a full installation, including a magnet-mount antenna that attaches easily to the roof of your vehicle. The antenna is then connected with a cable to the iBooster, all-in-one cradle booster with built-in phone charger. Once installed, the iBooster will amplify the wireless signal of your iPhone. You’ll experience fewer dropped calls, clearer call quality, and faster data rates to keep up with the iPhone’s many apps and 3G data service. Most importantly, your iPhone’s range will increase dramatically, allowing you to make calls from low-coverage areas.




SureCall Force 7

SureCall Force7 reveals its All-In-One Solution for Poor Indoor Cellular and Wi-Fi Reception. New Force7 Industrial is the first and only booster to offer triad of cellular, Wi-Fi and HDTV capabilities.

This all-in-one signal amplifier is the first for large-scale commercial use, improving both cellular and Wi-Fi reception.

With such great inventions, everybody believes to live the future with cellular. Boosters are the first step towards the new standard in how we communicate and receive information: virtually cord-free. In addition to boosting cellular data and having HDTV capabilities, the Force7 Industrial both boosts and extends Wi-Fi, answering a need we have heard from commercial integrators, especially for new and renovated buildings.

The Force7 Industrial builds upon the award-winning capabilities of the Force5 to provide the added benefits of a signal extender, Wi-Fi booster, and HDTV capabilities, at the same price. It delivers a complete voice and data signal enhancement solution by employing SureCall’s patent-pending 7-band cellular technology, which delivers PCS and Cellular frequency bands, AWS, and two LTE frequencies for Verizon, AT&T and T-Mobile. It delivers the fastest data rates in the industry and supports over 100 simultaneous users. With a maximum gain of 80dB, the Force7 Industrial delivers coverage to areas up to 80,000 square feet, and offers adjustable upload and download gain for each individual frequency, making it the most customizable booster available.

Additionally, the Force7 Industrial features a built-in Wi-Fi amplifier that improves and extends Wi-Fi coverage over a range of 50,000 square feet via the same indoor antenna. Users simply connect their existing router into the Force7 Industrial’s WAN port, and the booster provides an extended Wi-Fi connection in addition to the extended cellular coverage.  This booster also serves as a router for new installations within the building, eliminating the need for additional hardware and installations.

For those wanting to access over-the-air (OTA) HDTV signals in their area, such as ABC, CBS, Fox, NBC and PBS, the Force7 Industrial’s HDTV booster receives and amplifies all locally-aired HDTV television stations and delivers those signals to one or two televisions. A zip code search of OTA HDTV stations is available at

Like all SureCall boosters, the Force7 is covered by an industry-best three-year warranty. As an industrial booster, it requires carrier approval prior to installation by a qualified installer.





An Analysis by various Customers on Wilson Electronics DT Cell Phone Signal Booster

A brew of both good and not too good buzz from the customers is ringing at the manufacturer’s ears. Well, most of the reviews are really amazing, in fact genuine and authentic. One of the customers switched from a Verizon cell phone to the Iphone 4 and AT&T. Coverage in their area, Sedona, AZ was not that great with AT&T. He was getting 1-2 bars and a few dropped calls with his new phone. But amazingly, when I went up on the roof, he discovered 5 bars on his phone. The very excited customer bought the Wilson unit and installed it as per their clear instructions, putting the antenna on the roof and the amplifier in my living room. It raised his bars in the house to 4-5 bars. Calls are clear and strong now. Most of the customers say if the signal is faint it will help a lot. Some only get 1x connection but without this they get almost no signal.

On the other hand, there are handful of customers who are really not happy with the product. They find the product to be worthless as they find no signal improvement in their area.

Nevertheless, huge numbers of customers simply love the product and find it to work the way they wanted and expected. Our excited customers are set to recommend this product to their friends and relatives.

I think one need not go sceptical reading about this product. The signal bars definitely shows a huge difference from no signal to 1 Bar to 3bars-4bars. And that’s a remarkable difference for many who used to literally miss their important calls and texts. In simple words, the manufacturers give the customers the guaranty that it works as it is been advertised.