This product was exclusively designed to give the best expected results when used in a single room. The Wilson Electronics Desktop (DT) Cell Phone Signal Booster increases your cell phone’s signal by more than 15 times. Also, it notably improves your cell phone’s overall performance by minimizing dropped calls, increasing data rates, and letting you enjoy clearer reception, making the Wilson DT the ideal solution in an office or at home.
Basically, the prime cause of dropped calls is mainly due to low signal output power from the cell phone to the cell tower, which limits the phone’s ability to communicate with the tower. To address this problem, the amplifier and the outside antenna work together to increase the phone’s output power by more than 15 times over using just the phone alone. The Wilson DT amplifies the signal both to and from the cell tower, increasing the power to penetrate through natural or man-made obstructions, thus enabling you to communicate where you were unable to before.
The Wilson DT is connected via a coaxial cable to the outside antenna, which executes best when mounted outside of the building and pointed towards the nearest cell tower. The antenna can also be mounted on a window or on an outside wall. Once installed, the Wilson DT enhances the signal of multiple cell phones and data cards near the device. The result is that you will experience fewer dropped calls, clearer call quality, and improved data rates–even with 3G technologies.
The Wilson DT is compatible with all US and Canadian cellular providers, excluding iDEN, Nextel, and MIKE. Also, it supports CDMA, TDMA, GSM, and AMPS cell phone technologies, as well as data protocols such as GPRS, 1xRTT, HSDPA, EVDO, and EDGE.